Front Window Failure: VW Caddy Motors Need Urgent Fix

Dealt with a similar power window issue on my 2007 VW Golf. When both front windows stop working simultaneously, its often related to the electrical system rather than mechanical window regulator failure. First check the fuse box for blown fuses controlling the window system. In VW models, a failing door control module can cause complete window failure on both sides. The onboard computer error suggests this might be your case. When my windows failed, removing the door panel revealed the control module was damaged from water intrusion. The window troubleshooting showed both motors were actually fine, but they werent receiving proper signals from the control unit. The fix required: Replacement of door control module, Window reset procedure, System recalibration Its a serious repair requiring specialized diagnostic equipment. A general reset procedure likely wont solve this since your computer shows an error code. Both windows failing at once typically points to an electrical rather than mechanical issue. Consider having the electrical system diagnosed before replacing any window motors or regulators. Module failure is a known issue in these VW models from that era.

Thanks for sharing your Golf experience. Same thing happened with my Caddy last winter, both front windows completely dead with the computer throwing window regulator errors. Local shop diagnosed a faulty control module too, though I first hoped it was just needing a window reset. Got it sorted but curious, what was your final repair cost? Mine was around 400€ for parts and labor but wondering if prices vary much. Also, has the window system been working reliably since your fix? No issues with the power window controls after the repair? My window switch and motors have been perfect since replacing the module, but always good to hear long-term feedback from others who had the same work done.

Good to hear your Caddy got fixed properly. Similar story with my Golf, after diagnosing the car electronics properly, the control module replacement solved all window issues completely. My total repair came in at 290€ including parts and labor. The repair shop managed to source a refurbished control module which helped keep costs down. The window controls have been flawless for over 2 years now, no more error messages or window troubleshooting needed. The key was getting that initial electrical diagnosis correct. Once they identified the faulty module as the culprit rather than the window motors or regulators, it was a straightforward fix. The power window system works perfectly now, just like when the car was new. Make sure they perform the window regulator initialization after any module replacement. Mine initially showed initialization errors until they recalibrated the system properly. After that final step, everything worked like a charm.

Thanks for all the feedback. Finally got the repair done last week after putting it off for too long. The mechanic confirmed it was indeed the control module causing both front car windows to fail. They did a complete electrical diagnosis first which was smart, saved replacing parts unnecessarily. Total bill came to 375€ including the new module, labor and window reset procedure. More reasonable than expected considering both windows were completely dead. The window regulator system is working perfectly now, smooth operation and no more error codes on the computer. One useful thing I learned: water damage to the door electronics is apparently pretty common in these older models. The mechanic showed me how to check the drainage holes to prevent future issues with the window motor systems. Really glad I asked here first before just taking it to any unusual shop. Having some knowledge about the likely cause helped me avoid unnecessary repairs or parts replacement.