PT Cruiser SRS Warning Light Signals Airbag Alert

Having experienced a similar airbag sensor issue with my PT Cruiser CRD from 2004, the SRS warning light typically indicates a fault in the airbag system that requires immediate attention. When the airbag light appeared in my vehicle, the problem traced back to a loose wiring connection under the driver seat. The crash sensor wiring harness had deteriorated due to seat movement over time. This is a known issue with these models and can compromise vehicle safety if left unaddressed. Key warning signs to watch for: SRS light stays on continuously, Light flickers intermittently, System shows multiple airbag deployment codes when scanned Important points about repair: Requires specific diagnostic equipment for airbag systems, Must be handled by technicians certified for airbag work, Common fault points are seat wiring and clockspring, After repair, system needs proper reset and verification This is considered a serious safety issue since faulty connections can either prevent airbag deployment or cause unexpected deployment. The airbag recall history for this model also suggests checking if your vehicle has any outstanding safety campaigns. Best to address this promptly through a certified shop that specializes in SRS systems.

Thanks for sharing that info about the SRS light and restraint system issue. Your experience with the wiring harness sounds similar to what I am dealing with. The continuous warning light has me concerned about proper airbag deployment in case of an accident. Did you remember roughly how much the airbag repair ended up costing? Also, have you had any other SRS-related problems since getting it fixed? My local shop quoted me 400€ for diagnostics and repair, but I want to make sure that is reasonable for this type of work.

The 95€ repair cost for fixing the faulty connection in my restraint system was very reasonable compared to the quote you received. Since having the crash sensor wiring properly repaired, the SRS system has worked flawlessly with no warning lights or airbag deployment concerns. The repair involved: Diagnostic scan of the airbag system, Locating and replacing the damaged wiring connector, Final testing to ensure proper vehicle safety function A 400€ quote seems high for what could be a simple wiring issue. The most common fault on these models is exactly what mine had, a damaged connection under the seat affecting the crash sensor. Unless there are multiple problems with the airbag system, I suggest getting a second opinion from a shop that specializes in SRS repairs. Worth noting that once properly fixed, these systems are quite reliable. Having a functioning restraint system is crucial for passenger safety, but you shouldnt have to overpay for a basic wiring repair.

I finally took my car to get the SRS light checked yesterday and the experience confirmed your advice was spot on. Found a certified shop that specializes in restraint system repairs and they diagnosed it as a loose wiring connection, just like you mentioned. The final repair cost came to 120€, which included: Full system diagnostic scan, Fixing the wiring harness under the seat, Testing the airbag system operation Really glad I got that second opinion instead of paying the 400€ quoted initially. The mechanic showed me the worn wiring and explained how these connections can deteriorate over time. Their thorough approach to vehicle safety gave me confidence in the repair. The SRS light is now off and staying off. Good to have peace of mind knowing the car safety systems are working properly again. Thanks for helping me avoid an overpriced repair while still getting the issue fixed correctly.