Mabau
Problems with the camshaft adjustment on the 2015 Peugeot 5008 petrol engine
Loss of engine power
Jerking on acceleration
Unsteady engine
Valve adjustment noise
Check engine light on
Weird engine noise
Poor fuel economy
(Translated from German)
4 comment(s)
Hey, thanks for your answer! My Peugeot has a mileage of 36787 km. I had the last service almost 5 months ago. It's also a gasoline engine, so it's probably a similar problem to yours. If it really is the valve mechanism, I'm relieved that there is probably a solution. The cost doesn't sound too bad at first. I think I'll have it checked at my garage. Thanks for the tip!
(Translated from German)
Hey, no problem, always welcome! Yes, with your mileage and the last service, it really does seem to indicate a similar problem. I would really recommend just having it checked at your garage. Since my repair didn't cost the earth either, if it really is the valve mechanism, it should be within your budget. Good luck getting your Peugeot running properly again soon. Keep us posted on how it goes!
(Translated from German)
Let our mechanics help you!
Hi, I'm not an expert despite having moderate experience with cars, but I had a similar problem with my 2013 Peugeot 3008. As you suggest, it was indeed the valve mechanism in my case, more specifically it was worn in/defective. I took the car to my preferred garage. After an accurate diagnosis, they were able to identify the problem and replace the defective valve mechanism. The whole process cost me around €405. Now the car is running perfectly again, even a little more economical in terms of fuel consumption. What are the exact specifications of your car? Maybe I can help you then, or at least give you some advice. I hope this helps a little!
(Translated from German)