100% Free

No Scanner Needed

Carly logo

ChrisVogel

Overheating problems with the 2009 Ford Fusion - Possible problems and suggested solutions

Overheating

Hi guys, I currently have a problem with my 2009 Ford Fusion. It recently started to overheat. I suspect it has something to do with the cooling air flap system, but I'm not sure. Do any of you have experience with problems like this and can give me troubleshooting tips? How did you get it fixed at the garage and what was your experience? Any tips will be appreciated!

(Translated from German)

4 comment(s)


TimoPete

Hi, I happened to have a similar problem with my 2019 Ford Transit, so pretty similar to yours. I wouldn't call myself a car expert, but I do have some experience. Nevertheless, I didn't recognize the fault myself at the time and went to the workshop. There they discovered that the wiring harness for the radiator blind was defective and rubbed open behind the bumper. The repair cost 270 euros at the time. Have you ever read out the error code? Did the engine control light come on? Sometimes it can be helpful to know a little more about the symptoms. Hope this helps you a little!

(Translated from German)

ChrisVogel (Author)

Hey, thanks for your answer! It really helped me. Last serviced the car at 76069 km. Nothing special was found during the inspection, so I was surprised that it started to overheat. I'm no expert, but the problem seems a bit more serious. The fault code wasn't read, so I really can't say much about it. I'm looking forward to more answers from the community. A big thanks for any other tips!

(Translated from German)

TimoPete

No problem, always welcome! You're right, it could be a more serious issue, but don't let it drive you crazy, it could be something simpler. They probably would have detected major defects during the inspection. You say the fault code wasn't read. That would be really helpful in this case. Maybe you could get yourself an OBD2 adapter. These are available quite cheaply and you can then connect it to your cell phone via Bluetooth and read out the error code. This will give you a better basis for the conversation at the workshop. Good garages should also be able to determine the cause of heat problems. Sometimes it is simply a defective pump, a porous hose or a calcified radiator. I hope you find the solution to your problem soon. Keep us up to date!

(Translated from German)

ChrisVogel (Author)

Hey, that sounds like a really useful idea! I'd never considered an OBD2 adapter before, but that sounds like a sensible investment for future problems. I'll take your idea on board and get myself one of these. Thank you so much for the tip! As soon as I have the fault code, I'll share it here. And yes, I will visit a garage and hope it's nothing too serious. Thanks again for your help and I'll keep you posted!

(Translated from German)

Let our mechanics help you!

Want to find out more about your car?

Get the Carly Scanner and the app now

Check current offers
Mobile and adapter showcase
Car Brands
carly-logo

© 2024 Carly Solutions GmbH & Co. KG. All rights reserved