100% Free

No Scanner Needed

Carly logo

sinaschulz66

Dead Anti-Theft System in Buick Enclave Needs Expert Fix

Having trouble with my 2015 Buick Enclave (29k km, gas engine). The anti-theft system seems dead, no alarm response and error codes showing up on the dash. Already had one frustrating mechanic visit that didnt fix it. Has anyone dealt with a similar alarm sensor malfunction? Looking for recommendations on what could be wrong and trusted repair solutions.

4 comment(s)

vivienhoffmann71

The alarm sensor issue you describe matches what I encountered on my 2012 Buick LaCrosse. The security alarm system completely stopped responding, showing similar error codes. After investigating, the service center found it was a false alarm trigger caused by a faulty door lock actuator, which also affected the car alarm control module. The repair required: 1. Replacing the main door lock actuator 2. Reprogramming the body control module 3. Resetting the entire alarm sensor network This was considered a moderate repair job since it involved both mechanical and electronic components. The alarm control system in these Buick models is integrated with several other security features, so when one component fails, it can trigger multiple error codes. Key signs that confirmed this diagnosis: No response from remote lock/unlock, Security light staying on, Unusual activation of the car alarm, Multiple electronic error codes The factory security system needed complete recalibration after the new parts were installed. While not the most serious repair, it required specialized diagnostic equipment to properly reset the alarm control systems. This is a known issue with several GM models from that generation, typically appearing between 25-40k kilometers.

sinaschulz66 (Author)

Thanks for sharing your experience with the Buick LaCrosse alarm problem. Dealing with a similar power failure in my Enclave last month. The immobilizer system was acting up and multiple security alarm warnings kept flashing. After reading your post, I see our issues match, especially the part about the faulty door actuator triggering the car alarm out of nowhere. My battery issue turned out to be unrelated, but the main problem was indeed the security system just like in your case. Mind sharing what the final cost was for your repair? Also curious if youve had any recurring issues since getting it fixed? The shop says I might need additional sensors replaced down the line and Id like to know what to expect.

vivienhoffmann71

The total repair cost for my LaCrosse alarm system fix was quite reasonable at 45 currency units, which covered reprogramming the security alarm to properly sync with the optical locking signals. Since the car alarm control module repair, everything has worked flawlessly for several months now. Unlike what your shop suggested, I havent needed any additional sensor replacements. The false alarm issues completely stopped after they correctly coded the system. The warning lights disappeared, and the remote functions are all responding normally now. Based on my experience, if they properly diagnose and fix the core issue with the alarm control module, you shouldnt need ongoing repairs. The key is making sure they fully reset and reprogram the system rather than just replacing parts. Watch out for shops suggesting unnecessary sensor replacements. A properly configured security alarm system should work reliably once the initial programming is done right. Battery issues and door sensors rarely need replacement unless physically damaged.

sinaschulz66 (Author)

Having dealt with this repair saga, I finally got my Enclave fixed last week. Got lucky and found a certified shop specializing in vehicle security systems. The technician spotted the real problem, a damaged connection in the main alarm control unit, not just sensor issues like the first shop claimed. The repair process was straightforward. They replaced the faulty control module and recalibrated the entire security alarm system. Cost came to 65 currency units total, including diagnostic time and programming. No more power failure warnings or immobilizer problems since then. Huge relief to have this sorted properly. The car starts normally now, no unusual alarms going off, and all security features work as they should. Really glad I didnt go for the expensive sensor replacement package the first shop tried pushing. Appreciate the advice about getting it properly diagnosed. You were right, once they found the actual issue with the alarm control system, it was a one-and-done fix. No need for additional repairs or parts.

Join the discussion now: